Industrial Mixer Frequently Asked Questions

PerMix standard mixers are organized into ribbon mixers, plough mixers, paddle mixers and double cone mixers. Ribbon and paddle families include horizontal and vertical configurations.

A standard model is intended for atmospheric, non-ASME service. It may include a low-pressure non-ASME heating or cooling jacket.

Vacuum, internal pressure, ASME code construction, ATEX execution, high containment, high-pressure thermal service or substantial custom process integration move the project to QuantumX.

Liquid mixing, emulsification, dispersion and homogenization are organized under the EmulXion liquid-processing platform.

Working volume is the usable batch volume at the selected fill level, not the gross geometric vessel volume. It is determined from batch mass divided by loose or operating bulk density, with allowance for the mixing action and process additions.

Start with material flowability, cohesiveness, fragility, density variation, particle-size distribution, liquid addition, required shear, sanitation, cycle time and discharge behavior. The selection guide compares each technology.

FAT scope can be defined for the project and may include mechanical inspection, controls checks, safety verification, dry run, water testing or material-based performance testing where practical and approved.

Yes. Common options include 304 and 316/316L stainless steel, with carbon steel and selected alloys available based on corrosion, wear and sanitation requirements.

Yes, when the duty is suitable for a low-pressure, non-ASME jacket. Higher pressure, code-stamped or demanding thermal systems are evaluated under QuantumX.

Complete inquiries containing material, batch size, bulk density, process objective and compliance requirements can be routed directly to application engineering. Response time depends on project complexity, but the form is designed to prioritize qualified production opportunities.